Step down transformer suggestion

[Rifay]

HI i have griot garage 6" random orbital polisher from USA .but i need to use this on india .if i want to use this on india ,i need to use any voltage convertor ??? Like step down transformer from 220v to 110v correct???if i use step down transformer it will reduce/damage the polisher????

[abarth]

I would suggest you contact the manufacturer. It's not just the voltage that differs but also the frequency. Our AC supply is 50 hz while in the US is 60hz, your polisher will run slower here.

[sgiitk]

Let me add to abarth; This being almost certainly induction motor based, will run slower as pointed out by him. You can happily use the inexpensive voltage adapters/converters which are solid state devices. However, for extended running it will also draw a higher current, and may even need a 95V power supply which will have to be a custom transformer. However, looking at the system I expect a voltage adapter should do, unless you feel it getting too hot. Of course I am assuming there is no sophisticated electronics in the unit, else a transformer may be the only safe way.

[Rifay]

Let me add to abarth; This being almost certainly induction motor based, will run slower as pointed out by him. You can happily use the inexpensive voltage adapters/converters which are solid state devices. However, for extended running it will also draw a higher current, and may even need a 95V power supply which will have to be a custom transformer. However, looking at the system I expect a voltage adapter should do, unless you feel it getting too hot. Of course I am assuming there is no sophisticated electronics in the unit, else a transformer may be the only safe way.

I cant understood clearly sir.plz can u explained briefly plz.im new to here

[sgiitk]

Rifay; Let me clarify.

1. The cheapest is an inexpensive converter. This cuts off part of the waveform and gives you effectively 110V. The pluses - cheap, light. Works in 95% cases. But there are some which work on the peak voltage, and these can get into trouble.
2. Transformers: Safest costly and bulky.
3. 95V See as you are on 50Hz and not 60Hz an induction motor draws more current. If you plant to run the device for hours on end, then you need something like 95V to prevent overheating. I once had a US origin refrigerator and had to get a custom transformer made. So if you are not planning to run it for hours on end continuously forget this bit as well.

[Rifay]

Rifay; Let me clarify.

1. The cheapest is an inexpensive converter. This cuts off part of the waveform and gives you effectively 110V. The pluses - cheap, light. Works in 95% cases. But there are some which work on the peak voltage, and these can get into trouble.
2. Transformers: Safest costly and bulky.
3. 95V See as you are on 50Hz and not 60Hz an induction motor draws more current. If you plant to run the device for hours on end, then you need something like 95V to prevent overheating. I once had a US origin refrigerator and had to get a custom transformer made. So if you are not planning to run it for hours on end continuously forget this bit as well.

What is 95V??

[Rifay]

What is 95V??

I alreay bought isolated toroidal transformer .cost is 8100RS

[sgiitk]

I already bought isolated toroidal transformer .cost is 8100RS

Excellent choice. As log as the device does not overheat you are Ok. It will get a bit warmer than in the US but that is normal. Incidentally where did you get the transformer from. Rating?

[Rifay]

Exce3llent choice. As log as the device does not overheat you are Ok. It will get a bit warmer than in the US but that is normal. Incidentally where did you get the transformer from. Rating?

I got it from chennai.brand is maxine ,2000watts