Product Review

**************

Carpro Hydr02 Silica Spray Sealant




Applied on ->18th May,20

**********

Qty Used->30 Ml used out of 100 ML bottle

*********

Dilution Ratio->(1:7)Product: Water(So 30 ML gave me around 240 ML of Product for use)

***************

Price of 100 ML bottle->1500 INR

***********************

Durability->Yet to be tested however roughly 6 months should be good

**********

Application Procedure

**************************

1.Washed the car thoroughly

2.Applied Carpro SPOTLESS to remove any Hard Water spots.Then used a soaked MF Cloth to spread the product evenly. Waited for 30 seconds and then rinsed with water

3.Applied Carpro IRON X to remove and iron contaminants. Let the product dwell for 2 minutes and see the color change to purple as it dissolves the iron and other metal particles.Then used a soaked MF Cloth to spread the product evenly. Waited for 4 minutes and then rinsed with water.

4.Washed the car again with soap to clear the paint of any residue.

5.While the car is wet go panel by panel and spray the spray sealant and within 10 seconds rinse with a strong stream of water. The Product is applied and water beading, silky touch and gloss is immediately visible.




Additional points to Note:-

***************************

1.My vehicle was ceramic coated an year ago and the coating was holding fine. It was just to add some gloss and protection to the existing layer

2.The product can be applied to non coated vehicles as well

3.DO NOT use the spray sealant in direct sunlight or while the surface is hot.The Sealant flashes and dries in seconds if not attended and is difficult to remove.Best use it in shade

4.The cleaner the paint the more durability the product will have.

5.The reason for me using Carpro SPOTLESS & Carpro IRON X was to decontaminate the paint.Its not compulsory.If you feel the paint is clean of any contaminants you can directly apply the product after washing.

6.The product can be used on Plastic,Alloys,Paint without issues.

7.For me it took 4 hours for the whole process but only for the applying of the sealant it should not take more than 1 hour.




All the snaps were taken around evening time and in shade while i went out to get some groceries

Click image for larger version. 

Name:	20200520_115232.jpg 
Views:	34 
Size:	7.35 MB 
ID:	239903Click image for larger version. 

Name:	20200519_180516.jpg 
Views:	31 
Size:	1.79 MB 
ID:	239915Click image for larger version. 

Name:	20200519_180547.jpg 
Views:	31 
Size:	2.16 MB 
ID:	239914Click image for larger version. 

Name:	20200519_180720.jpg 
Views:	31 
Size:	1.83 MB 
ID:	239913Click image for larger version. 

Name:	20200519_180845.jpg 
Views:	32 
Size:	2.47 MB 
ID:	239912Click image for larger version. 

Name:	20200519_180859.jpg 
Views:	29 
Size:	1.28 MB 
ID:	239911Click image for larger version. 

Name:	20200519_180909.jpg 
Views:	32 
Size:	1.19 MB 
ID:	239910Click image for larger version. 

Name:	20200519_180928.jpg 
Views:	30 
Size:	1.90 MB 
ID:	239909Click image for larger version. 

Name:	20200519_180948.jpg 
Views:	31 
Size:	1.32 MB 
ID:	239908Click image for larger version. 

Name:	20200519_181014.jpg 
Views:	30 
Size:	5.89 MB 
ID:	239907Click image for larger version. 

Name:	20200519_181046.jpg 
Views:	30 
Size:	5.78 MB 
ID:	239906Click image for larger version. 

Name:	20200519_181058.jpg 
Views:	31 
Size:	6.13 MB 
ID:	239905Click image for larger version. 

Name:	20200519_181116.jpg 
Views:	31 
Size:	7.21 MB 
ID:	239904Click image for larger version. 

Name:	20200519_180503.jpg 
Views:	29 
Size:	1.21 MB 
ID:	239916